A powerful, eco-friendly cleaning solution for sensitive and heavy-duty industrial environments. Non-abrasive, non-conductive, and leaves absolutely no residue behind.
Dry ice blasting is an innovative cleaning process that uses recycled CO₂ in its solid form — dry ice pellets — to remove contaminants from surfaces. The pellets are accelerated through compressed air and impact the surface at high velocity, delivering three simultaneous effects that lift and eliminate virtually any contaminant.
Dry ice pellets hit the contaminated surface at high speed, delivering kinetic energy directly to the contaminant layer.
Extreme cold (−78.5°C / −109.3°F) causes contaminants to become brittle, crack, and lose adhesion.
Pellets instantly convert from solid to gas, expanding 800× in volume and lifting contaminants away from the surface.
CO₂ dissipates harmlessly into the atmosphere. Only the removed contaminant remains to be swept away.
Six reasons industries across Trinidad & Tobago are choosing dry ice blasting over conventional cleaning methods.
Safe for delicate machinery, electrical wiring, and protective coatings. Will not damage substrate surfaces or alter dimensional tolerances.
Only the removed contaminant requires disposal. Dry ice sublimates completely, leaving zero cleaning residue or secondary waste stream.
Completely safe for use around electrical equipment, control panels, switchgear, and sensitive electronics — no shutdown required.
No harmful chemicals, no water consumption, and uses recycled CO₂ captured from existing industrial processes — not adding new emissions.
Equipment is often cleaned in place without disassembly, eliminating lengthy teardown, drying, and reassembly times that cost you production hours.
Improves workplace safety by removing slip hazards and chemical exposure, and leaves surfaces clean enough for accurate inspection and maintenance.
Dry ice blasting is effective across a wide range of industrial and commercial environments, wherever conventional cleaning falls short.
A direct comparison against conventional industrial cleaning methods across the metrics that matter most to your operation.
| Cleaning Method | Surface Damage | Secondary Waste | Downtime | Electrical Safety | Environmental Impact |
|---|---|---|---|---|---|
| Dry Ice Blasting | None — Non-abrasive | None | Minimal | Safe — Non-conductive | Eco-friendly |
| Sandblasting | High — Abrasive | Significant | Extended | Not safe | Waste disposal required |
| Chemical Cleaning | Potential damage | Chemical waste | Extended (drying time) | Hazardous | Toxic chemicals |
| Pressure Washing | Potential damage | Wastewater | Extended (drying time) | Not safe | Water consumption |
At the core of dry ice blasting is a commitment to safety and environmental responsibility. This method aligns with modern industrial standards while protecting both workers and the planet — making it the right choice for operations that take compliance seriously.
From mobile deployments to complex hazardous-environment jobs, Absco's dry ice blasting team is equipped to handle your most demanding cleaning requirements.
On-site and mobile dry ice blasting services bring the cleaning directly to your location — no transport of equipment required.
Highly trained professionals with extensive industrial cleaning expertise across oil & gas, manufacturing, and food processing sectors.
Suitable for confined spaces and hazardous locations with proper safety protocols, certifications, and risk assessment procedures.
Seamlessly integrates with your existing maintenance schedules and turnaround programs for minimal disruption to operations.
Tailored cleaning plans designed around your specific industry, equipment types, contamination profile, and operational constraints.
Proven track record of excellence across multiple industries, with documented results and a commitment to first-pass quality standards.
Real-world applications where dry ice blasting consistently delivers superior results over conventional cleaning alternatives.
Remove dust, oil, and contaminants from electrical panels and control systems without shutting down operations or risking electrical damage — the non-conductive nature of dry ice makes this uniquely safe.
Effectively remove heavy grease buildup from pumps, valves, and compressors in refineries and offshore platforms without disassembly, cutting turnaround time significantly.
Restore equipment and facilities after fire damage by removing soot, char, and smoke residue without causing additional harm to surfaces or structure.
Clean production moulds and tooling quickly between runs without lengthy cooling periods or risk of mould damage — production-ready faster with better surface quality.
Achieve FDA-compliant sanitation in food processing facilities without chemical residue or moisture that could contaminate products or trigger shutdowns.
Gently clean delicate historical surfaces, monuments, and artefacts without abrasion or permanent damage — preserving heritage while removing decades of grime.
Discover how our dry ice blasting services can improve your operations, reduce downtime, and deliver a safer, more environmentally responsible cleaning solution.